Works as advertised. No more parasitic power draw!
BOLTHUT™ Battery Disconnect Switch — Master Kill Switch, No Drain


A battery that keeps dying while the vehicle just sits there.
You just want the power off when you're not driving.
Unbolting the battery terminal
Means a wrench every time and corroded bolts.
A trickle charger left plugged in
Needs an outlet the vehicle may sit far from.
Pulling the fuse or negative cable
Fiddly, easy to forget, and sparks at the post.
Just jump-starting it again
Wears the battery and strands you at the worst time.
You need a clean cut-off you can flip in a second.
Three ways to cut the drain, one that costs the least.
Install it once — it works every single drive after that.
Aftermarket accessory. Not affiliated with, endorsed by, or sponsored by any vehicle manufacturer; brand names used for compatibility reference only. Always check fitment for your exact year/make/model before purchase.
Real install, real twist, no guesswork.
Small design choices you feel every time you park it.

OFF breaks the circuit so nothing draws power.
Solid brass carries a clean, low-loss connection.
Flip power off or on with a single turn.
Metal housing handles heat and vibration.
Ready for cars, trucks, RVs and boats.
Killing power helps stall an opportunist thief.
Little touches that keep your battery ready to go.
A Battery That Stays Charged
Alarms, clocks and modules sip power around the clock, and after a week or two of sitting your battery is flat.
The BOLTHUT™ Battery Disconnect Switch cuts that draw at the source, so the power is off until the moment you twist it back on.

Twisting to OFF fully breaks the connection to the battery.
nothing draws power
Alarms, dash clocks and standby modules stop sipping current, so the battery holds its charge while the vehicle sits.
Come back weeks later and it still cranks.
A clearly marked knob turns the power off and on.
off in one move
Twist to OFF when you park and ON when you drive — one quick move at the knob, no cables to pull.
The ON and OFF marks leave no guessing.
The current runs through heavy brass posts, not thin plate.
a clean connection
Brass resists corrosion and carries the load without heat build-up, so starting power stays strong.
Tighten the studs once and forget them.
One switch handles both common vehicle voltages.
fits most vehicles
Cars, trucks, RVs, campers and boats all run on the same top-post or side-post setup this switch mounts to.
Compact enough to tuck beside the battery.
The small things you notice every time you park.
Heavy brass posts carry current without corroding.
The twist knob stays smooth through heat and grime.
Marked positions leave no doubt which way is off.
A low, tough housing tucks in beside the battery.

Twist to OFF before the vehicle sits, and the battery keeps its charge for weeks instead of going flat.

Kill the draw during cold layup so your classic or seasonal ride starts on the first turn come spring.

Cut power to the house and start batteries when you're docked or parked, so nothing drains overnight.

Turning the power off helps deter an opportunist thief while the vehicle is parked and unattended.
Mounted in a Few Minutes
Use a basic wrench to loosen the battery terminal nut.
Connect the switch between the post and cable using the brass studs.
Snug the studs so the connection is solid and secure.
Turn the knob to OFF when you park, ON when you drive.
Installed this battery disconnect switch on my RV to prevent battery drain while in storage. Very easy to operate with a simple twist of the knob.
One small switch that quietly protects your charge.


Everything you need to mount it and cut the drain.

Blue twist knob with clearly marked ON and OFF.
Solid brass studs for a clean, low-loss link.
Hardware to tighten the switch onto the terminal.
Mounted and cutting drain in a few minutes.
Backed by BoltHut support if anything's off.
Our Story
BOLTHUT builds small upgrades for drivers who want their car to feel a little better every day.
We pick gear we would actually keep in our own vehicles.
Simple, sturdy designs backed by a 24-month warranty.
A US-based team that answers within 24 hours.
— The BOLTHUT Team

From checkout to a battery that holds its charge.

If a parked battery keeps dying on you, this one's for you.







Installed this battery disconnect switch on my RV to prevent battery drain while in storage. Very easy to operate with a simple twist of the knob.
David Vance
✓ Verified Buyer
Solid brass terminal and durable casing. Works perfectly to cut off power.
Sarah Jenkins
✓ Verified Buyer
Great safety product! I installed this on my project car that sits in the garage for weeks at a time. It completely stops parasitic draw and keeps the battery fresh. The turn knob feels very secure and clearly marks the power-on and power-off states. Highly recommended!
Robert Taylor
✓ Verified Buyer
Very easy to install and works exactly as described.
Emily Watson
✓ Verified Buyer
I bought this for my boat battery to ensure everything is fully shut off when we are docked. The heavy-duty housing feels durable and well-built. It took less than five minutes to hook up and completely eliminates the risk of a dead battery.
Michael Carter
✓ Verified Buyer
Compact design, excellent quality, and gives great peace of mind.
Jessica Reed
✓ Verified BuyerEverything you might wonder before ordering. Contact us — we reply within 24 hours.
Twist the power off and keep your battery ready to start.
Bolt it onto your terminal, twist to OFF when you park, and the parasitic drain stops until you twist it back on, from long winter storage to the weekend on the water.
Add to CartYour BoltHut helper pup