+
BOLTHUT™ Mini Heat Gun — Focused Heat for Heat-Shrink & Solder Connectors
BOLTHUT™ Mini Heat Gun — Focused Heat for Heat-Shrink & Solder Connectors
Why DIYers Reach for the BOLTHUT™ Mini Heat Gun
Just enough heat for the small jobs — without the bulky, pricey full-size gun.
Compact 300W
Steady hot air that's easy to aim and control.
Shrinks & Seals
Made for heat-shrink tubing and solder-seal connectors.
One-Handed Control
Lightweight enough to hold through detailed work.
110V US Plug
Plugs straight into a standard US outlet.
Craft-Ready
Good for embossing, shrink film, resin, and wax seals too.
Stand-Ready
Rests on its built-in stand between passes.
Couldn't load pickup availability
Product Information
The BOLTHUT™ Mini Heat Gun is the small, focused heat source for the jobs a full-size gun is too much for. At a compact 300W, it puts out steady, even hot air — enough to shrink heat-shrink tubing tight, flow the low-temp solder in solder-seal wire connectors, and handle light craft and repair work — without the bulk, the cost, or the scorching risk of a lighter.
It's a lightweight handheld electric hot-air tool with a US 110V plug and a built-in stand, designed for one-hand use on the bench or out in the field. Best for low-voltage wiring, heat-shrink, and craft tasks — not for heavy-duty paint stripping or large industrial work. Let it cool before setting it down, and keep the hot nozzle away from skin and anything flammable.
What You Get
- 1 × Mini Heat Gun — compact 300W, black body with a red metal nozzle
- US 110V plug — ready for a standard North American outlet
- Built-in wire stand so it rests safely between passes
A simple, grab-and-go heat source that lives in the same drawer as your connectors and shrink tubing.
Specifications
| Tool type | Handheld electric hot-air (heat) gun |
| Power | 300W |
| Voltage / plug | 110V, US plug |
| Weight | About 300 g (per manufacturer) |
| Size | Compact handheld |
| Body | Black housing, red metal nozzle, built-in wire stand |
| Use | Hold the nozzle a few inches from the work and keep it moving |
| Best for | Heat-shrink tubing, solder-seal connectors, light craft & DIY (embossing, shrink film, resin, wax seals) |
| Not for | Heavy-duty paint stripping, large industrial jobs, or anything needing a rated high-output heat gun |
| Safety | Nozzle gets hot and stays hot after use — keep from skin and flammables, rest on the stand, let it cool fully before storing. Adult use only. |
Shipping & Delivery
Destinations: United States (48 contiguous states) & Puerto Rico, Canada, and 16 more countries worldwide. We don't ship to Alaska & Hawaii at this time.
United States: Processing 1–2 business days · delivery 7–10 business days · Standard $6.98 · Secured $10.98 · FREE over $59.
Canada & international: rates shown at checkout · delivery 7–10 business days (US/CA).
Every order includes full tracking.
30-Day Returns
You have 30 days from delivery to request a return. Email us first at support@bolthut.com — our team confirms your return and sends the authorized return address.
Refunds: issued to your original payment method within 10 business days after inspection.
Please wait for authorization from our team before shipping any return.
24-Month Warranty
Every BOLTHUT™ purchase includes a 24-month warranty covering manufacturing defects — replacement-first: verified issues get a new unit shipped, usually without sending the old one back.
Please inspect your order upon delivery. For shipping damage or a wrong item, contact us within 48 hours with clear photos. Manufacturing defects stay covered for the full 24 months.
Need Help?
Questions about your order? We reply within 24 hours.
Email: support@bolthut.com
Does This Sound Familiar?
The right heat makes these jobs easy — the wrong heat ruins them.
You don't need a bigger tool — you need the right-sized heat for small, precise work.
Why the Usual Heat Sources Fall Short
A lighter or match
Open flame heats unevenly and can scorch insulation or the tube before it shrinks.
A full-size heat gun
Heavy and bulky, and its high output is easy to overdo on small parts.
A hair dryer
Rarely gets hot enough to shrink tubing or flow solder-seal connectors.
A soldering iron
Touches one spot at a time and won't shrink tubing or seal a joint.
Small heat jobs need focused, even hot air you can aim — not a flame, and not an oversized gun.
The Right Heat Source for Small, Precise Work
Compact power that lives in the same drawer as your connectors.
Pairs with the BOLTHUT™ Solder Seal Wire Connectors — a fitting heat source for that kit. (Add it to your order at checkout.)
Aftermarket accessory. Not affiliated with, endorsed by, or sponsored by any vehicle manufacturer; brand names used for compatibility reference only. Always check fitment for your exact year/make/model before purchase.
Why the BOLTHUT™ Mini Heat Gun Just Works
Focused, even hot air in a size that fits the job.
Steady 300W Heat
Enough even heat to shrink tubing and flow solder-seal connectors.
Easy to Aim
A compact nozzle helps you heat the spot you mean to.
Light in Hand
Lightweight enough for fiddly, one-hand work.
Plug & Go
Straight into a standard 110V US outlet — no fuel, no charging.
Rests Safely
A built-in stand holds it up between passes.
Beyond Wiring
Handy for shrink film, embossing, resin bubbles, and wax seals.
The right amount of heat, in a tool you'll actually keep within reach.
Where People Reach for It Every Week
One small tool for the heat jobs that keep coming up.
Enough Heat for the Job — No More, No Less
A compact 300W tool that delivers steady hot air, aimed where you need it.
That's the difference between a clean shrink and a scorched one.
- 300W compact · 110V US plug · Lightweight handheld · Built-in stand
Compact 300W Output
Steady, even hot air sized for small parts.
300W handheld
Enough to shrink tubing tight and flow a solder-seal connector.
Without the bulk or overkill of a full-size gun.
- ↳ 300W · Even hot air · Small-part friendly
Light, One-Hand Design
A slim handle you can hold through a run of connectors.
Easy to control
Point the nozzle, heat the spot, move on.
Less fatigue on fiddly, detailed work.
- ↳ Lightweight · Slim grip · Precise aim
Plug Straight In
A standard US 110V plug — no fuel, no battery to charge.
110V US plug
Ready the moment you reach the outlet.
Consistent heat for as long as you need it.
- ↳ 110V US · Corded · Always ready
Rests on Its Stand
A built-in wire stand holds the hot nozzle up off the bench.
Rest it on its stand
Between passes it rests instead of rolling onto your work.
Let it cool fully before you store it away.
- ↳ Built-in stand · Hands-free rest · Cool before storing
Built Small on Purpose
A focused heat source, not a scaled-down industrial gun.
300W Hot Air
Steady output sized for small parts — not a high-output industrial gun.
Lightweight Body
Easy to hold and aim through detailed, one-hand work.
Single-Switch 110V
One on/off switch, standard US plug — nothing to set up.
Retractable Metal Stand
Folds out to rest the hot nozzle between passes.
One Tool for a Lot of Small Jobs
Heat-Shrink & Connectors
Shrink tubing tight and flow solder-seal connectors for a sealed splice.
Repairs on the Rig
Handle small harness and accessory heat-shrink jobs on cars, boats, and trailers.
Make & Create
Embossing, shrink film, resin bubble release, and wax seals.
Small Fixes
Loosen a stubborn sticker or warm a part before you work it.
Simple to Use
How to Use It
Plug In
Connect to a standard 110V US outlet on a clear, heat-safe surface.
Aim the Nozzle
Point the nozzle at the tubing, connector, or piece you want to heat — keep it moving.
Heat Evenly
Warm the spot until the tube shrinks or the solder flows. Keep the hot nozzle away from skin and flammables.
Rest & Cool
Set it on its stand between passes, and let it cool fully before you store it. Adult use only — the nozzle stays hot after use.
From Scorched Mess to Clean Shrink
Great mini heat gun! Heats up quickly and works perfectly for heat shrink tubing and embossing crafts.
One Small Tool for the Whole Bench
The heat jobs that meant a lighter or a bulky gun now take one compact tool.
Mini Heat Gun vs. Makeshift Heat
BOLTHUT™
Lighter / Big Gun
What's in the Box
Simple and ready to plug in.
Mini Heat Gun
Compact 300W, black body with red nozzle.
US 110V Plug
Ready for a standard North American outlet.
Built-In Stand
Rests the hot nozzle off the bench between passes.
Grab-and-Go Size
Lives in the same drawer as your connectors.
Backed by BOLTHUT
30-day returns and a 24-month warranty.
Our Story
Why BoltHut Exists
We started BoltHut with one belief: a car is just a box — until you make it yours. Every product we ship is something we'd bolt onto our own rides first.
Drivers First
Picked by people who actually drive.
Made for Real Life
Practical, portable, easy to use.
Backed by Care
24-month warranty and real human support.
— The BoltHut Team
What to Expect
From order to your first clean shrink, here's how it goes.
Order Yours
- Add it on its own or with a solder-seal connector kit.
- Checkout is secure and backed by a 30-day money-back guarantee.
It Ships Out
- We process orders in 1–2 business days.
- US & Canada delivery runs 7–10 business days.
Plug In & Go
- Aim, heat, and watch the tube shrink or the solder flow.
- Rest it on its stand and let it cool before storing.
Who Reaches for It
If you work with wire, shrink tubing, or small heat jobs, this is for you.
What Customers Are Saying
This mini hot air gun is surprisingly powerful for its compact size. I use it regularly for shrinking tubing on custom wiring harnesses and drying craft clay. The grip feels comfortable in hand, and the built-in stand keeps the hot nozzle off the desk safely. Having multiple color options is a nice bonus too. Great value for everyday DIY tasks.
Marcus Vance
✓ Verified Buyer
I bought this 300W portable mini hot air gun for small electronics DIY projects and crafting. It heats up almost instantly and reaches high temperatures very fast without blowing airflow too hard to blow light components away. The retractable metal stand makes it safe to set down on my workbench while taking breaks.
Brian Cox
✓ Verified Buyer
Fantastic mini heat tool for delicate work. Unlike heavy-duty industrial heat guns, this 300W model provides precise heating without scorching surrounding materials. It works exceptionally well for heat shrink connectors, embossing powder, and quick drying touch-ups. Extremely portable and simple to operate with a single switch.
Daniel Sterling
✓ Verified Buyer
Compact, lightweight, and very effective. Perfect tool for resin bubble popping and vinyl wrap details!
Samantha Reed
✓ Verified Buyer
Great mini heat gun! Heats up quickly and works perfectly for heat shrink tubing and embossing crafts.
Alex Mercer
✓ Verified Buyer
Heats up in seconds and very easy to hold. A must-have tool for any craft or small repair kit.
Olivia Brooks
✓ Verified BuyerCommon Questions, Answered
Everything you need to know before you order. Contact us — we reply within 24 hours.
Will it shrink heat-shrink tubing and flow solder-seal connectors?
Does it fit a US outlet?
How fast does it ship?
What if it's not right for me?
Is there a warranty?
Can it strip paint or do heavy-duty jobs?
Get the Right Heat for Small Jobs
Shrink tubing and flow solder-seal connectors with steady, even heat.
Keep a compact, controlled heat source on your bench — and pair it with the BOLTHUT™ Solder Seal Wire Connectors.
Add the Mini Heat Gun