+
BOLTHUT™ Car Dashboard Phone Holder — 360° Clip-On, No-Slip Grip
BOLTHUT™ Car Dashboard Phone Holder — 360° Clip-On, No-Slip Grip
Why Drivers Clip On the BOLTHUT™ Holder
Six reasons it beats a vent clip or a suction cup.
One-Second Clip
One squeeze and it locks onto your dash.
360° Rotation
Swivel the screen to any viewing angle.
Heavy-Duty Clamp
A strong spring holds firm over bumps.
No-Scratch Pads
Silicone grips guard your dashboard trim.
Fits 4–7" Phones
Adjustable arms hold most phones, case on.
No Glue Needed
Clips on and off, leaving no residue.
Couldn't load pickup availability
Product Information
A phone mount that clips on in seconds and holds through every bump. Squeeze the spring clamp, hook it onto your dashboard lip, rear-view mirror, or sun visor, and drop your phone into the adjustable arms — no glue, no suction cup, no tools.
The heavy-duty spring bites down so your phone rides steady over potholes, the 360° ball joint swings the screen to any angle for navigation, and soft silicone pads grip your trim without scratching it.
Shopping for a gift? It arrives boxed, clips on with no setup, and suits any driver who runs GPS or takes hands-free calls — and if it doesn't fit their car, there's a 30-day return.
What's Included
- 1 × BOLTHUT™ Car Dashboard Phone Holder (black)
- Heavy-duty spring clamp base
- 360° swivel ball joint
- Pre-installed silicone anti-scratch pads
- Quick-start card (no tools, no glue)
Specifications
- Mounts to: dashboard lip, rear-view mirror, or sun visor
- Rotation: 360° swivel ball joint, 180° tilt
- Fits phones: most 4–7 inch phones, case on or off
- Clamp: heavy-duty spring, no glue or suction needed
- Pads: soft silicone, anti-scratch and anti-slip
- Color: Black
- Fits: most vehicles
- Good to know: the spring is intentionally stiff — it holds your phone firmly on rough roads, so opening the clamp takes a firm press and a phone in a thick case can take two hands to remove.
Shipping & Delivery
Destinations: United States (48 contiguous states) & Puerto Rico, Canada, and 16 more countries worldwide. We don't ship to Alaska & Hawaii at this time.
United States: Processing 1–2 business days · delivery 7–10 business days · Standard $3.99 · Secured $10.98 · FREE over $59.
Canada & international: rates shown at checkout · delivery 7–10 business days (US/CA).
Every order includes full tracking.
30-Day Returns
You have 30 days from delivery to request a return. Email us first at support@bolthut.com — our team confirms your return and sends the authorized return address.
Refunds: issued to your original payment method within 10 business days after inspection.
Please wait for authorization from our team before shipping any return.
24-Month Warranty
Every BOLTHUT™ purchase includes a 24-month warranty covering manufacturing defects — replacement-first: verified issues get a new unit shipped, usually without sending the old one back.
Please inspect your order upon delivery. For shipping damage or a wrong item, contact us within 48 hours with clear photos. Manufacturing defects stay covered for the full 24 months.
Need Help?
Questions about your order? We reply within 24 hours.
Email: support@bolthut.com
Does This Sound Familiar?
Straight from drivers tired of mounts that won't cooperate:
If any of these sound like your car, this clip-on mount was built for it.
Why Other Mounts Don't Last
Air-Vent Clip Mounts
They block your vents, sit low in your sightline, and pop off when the vent flap bends.
Suction-Cup Windshield Mounts
The cup loses grip in the heat and drops your phone on a hot afternoon.
Sticky Gel Dashboard Pads
They collect dust, stop sticking after a few weeks, and leave residue behind.
Magnetic Phone Mounts
You have to stick a metal plate on your phone, and it can slip on a hard turn.
Each one solves a sliver and creates a new headache — you're still adjusting or re-sticking.
Buy Once, Skip the Endless Rebuys
Three ways drivers try to keep a phone in view:
One clip-on holder costs less than rebuying mounts that fall off or a premium magnetic kit.
Aftermarket accessory. Not affiliated with, endorsed by, or sponsored by any vehicle manufacturer; brand names used for compatibility reference only. Always check fitment for your exact year/make/model before purchase.
Why the BOLTHUT™ Holder Actually Works
Each part answers one of those mount headaches above.
Grips Through Bumps
Heavy spring clamp bites the dash and holds.
Swivels 360°
Ball joint turns the screen to any angle.
No Glue, No Marks
Clips on and off with zero residue.
Won't Scratch Trim
Soft silicone pads cushion every contact.
Fits Most Phones
Arms flex for 4–7" phones, case on or off.
Eye-Level View
Keeps GPS up so you watch the road.
Clip it on, set your angle, and drive — your phone stays where you put it.
A Mount That Holds Its Grip
A phone that slides or a mount that pops off mid-drive gets old fast. This holder clamps onto your dash in a second and keeps your phone steady where you can see it.
The heavy-duty spring bites down over bumps, and the 360° ball joint swings the screen to any angle — for GPS, calls, or a dash-cam view.
- Spring clamp
- 360° swivel
- No glue
A Clamp That Holds Its Grip
The heavy-duty spring clamps onto your dashboard lip and keeps its bite over potholes and speed bumps.
Heavy spring
Your phone rides steady instead of bouncing loose on rough roads.
Glance at your route without watching it wobble.
- ↳ Spring clamp
- ↳ Bump-steady
- ↳ Firm bite
Swivels to Any Angle
The 360° ball joint spins the screen to portrait or landscape and tilts it away from glare.
360° joint
Set it once for GPS, flip it for a call, dial out the sun on a bright drive.
The view is always where you want it.
- ↳ 360° swivel
- ↳ 180° tilt
- ↳ Glare-free
Soft on Your Interior
Silicone pads cushion every spot the mount touches, so the clamp grips without scratching your trim.
Silicone pads
No glue and no suction cup means no sticky ring left on your dash.
Clip it on and off and your interior stays clean.
- ↳ Anti-scratch
- ↳ No residue
- ↳ Clean removal
Fits the Phone You Carry
Four adjustable arms flex open to hold most phones from 4 to 7 inches, with the case on or off.
Adjustable arms
Swap phones or hand it to a passenger without refitting anything.
One holder for the phones in your household.
- ↳ 4–7" phones
- ↳ Case-friendly
- ↳ Adjustable arms
Designed Down to the Detail
Small touches that keep your phone steady, visible, and easy to load.
Heavy-Duty Spring
A strong clamp keeps a firm bite on the dash.
360° Ball Joint
Swivel to portrait or landscape in a flick.
Silicone Pads
Cushioned grips guard your trim from scratches.
Adjustable Arms
Four arms flex to fit most 4–7" phones.
One Holder, Every Spot
On the Dash
Clips to the dash lip so GPS sits right in your sightline.
On the Mirror
Hooks onto the mirror stem to keep the screen up high.
On the Visor
Clip it to the visor for a heads-up navigation spot.
Calls & GPS
Keeps your phone up and visible so your hands stay on the wheel.
HOW IT WORKS
Clip On in Seconds
Squeeze the Clamp
Press the spring clamp open with one hand.
Clip It On
Hook it onto your dash lip, mirror, or visor.
Load Your Phone
Spread the arms and drop your phone in.
Angle the Screen
Swivel the 360° joint to your view.
From Shaky Vent Clip to Rock-Steady Dash
This phone mount is incredibly sturdy. The clamp grips onto my dashboard perfectly without slipping, and the phone stays securely in place even on rough roads.
Eyes on the road every time you follow the route
The quiet confidence of a phone that stays exactly where you put it.
How the BOLTHUT™ Holder Compares
BOLTHUT™
Generic Car Mounts
What's In the Box
Everything shows up ready to clip on — no tools, no glue.
Clip-On Phone Holder
One black dashboard mount, ready to use.
Heavy-Duty Spring Clamp
Built in — grips your dash, mirror, or visor.
360° Swivel Ball Joint
Rotates the screen to any viewing angle.
Silicone Anti-Scratch Pads
Pre-installed to guard your interior trim.
Quick-Start Card
One-page guide — clip on, no tools or glue.
OUR STORY
Built by people who actually drive Exists
BOLTHUT started with gear for the road. This holder came from the same itch — a phone mount that clips on fast, holds through potholes, and doesn't wreck your dashboard when you take it off.
Made for the Road
Gear that clips on fast and holds through the drive.
Built to Last
A clamp that keeps its grip trip after trip.
You Come First
US support that answers within 24 hours.
— The BOLTHUT Team
From Box to Every Drive
Here's how the first days with your holder go.
Clip It On
- Squeeze the clamp, hook it on, drop your phone in.
- No tools, no glue — it's ready in seconds.
Find Your Spot
- Dash, mirror, or visor — wherever the view works for you.
- Swivel it once and your GPS stays put.
Clip On, Clip Off
- Pull it off when you park, snap it back when you drive.
- No residue, no marks left on your trim.
Made for Drivers Who Live in the Car
If you run GPS or take calls on the road, you're in.
Your Questions, Straight Answers
What drivers ask before clipping one on. Contact us — we reply within 24 hours.
Will it fit my phone and my car?
Is it hard to set up?
How long does shipping take?
What if it's not right for me?
How does the warranty work?
Is it hard to get my phone out of the clamp?
Ready for a Phone Mount That Holds Its Grip
★ 4.8/5 storewide average · Trusted by 16,000+ drivers
One clip-on holder snaps onto your dash, mirror, or sun visor in seconds, grips through potholes with a heavy-duty spring, and swivels 360° to any angle — no glue, no residue. Backed by a 24-month warranty and 30-day returns.
Get Yours Today